Yealink: Screen Capture and Access
Written by Marissa Orsini
Updated at November 12th, 2024
Table of Contents
Scope:
The following steps will allow you to view the screen remotely for any Yealink phone
Requirements:
- This requires firmware v73 or higher
- Original instructions can be found here
Configure Phone for Remote Access Via Web GUI (option 1)
Log into web GUI of phone at https://<ipaddress>
- Enter your credentials. Default is admin/admin. After provisioning these will be changed. Contact your service provider for credentials if needed
- Click on Features
- Click on Remote Control
- In the field Action URI Allow IP List enter any
- Click Confirm
Configure Phone for Remote Access Via Overrides (option 2)
- Add the following override to your Advanced page in the Manager Portal or NDP
- features.action_uri_limit_ip="any"
Accessing Phone Screen
- From any web browser navigate to https://<ipofphone>/screencapture
- You will be prompted for a user name and password. These are the same as the web GUI credentials. Contact your service provider if you do have them
- The screen will refresh with the same image that is present on the phone's screen
Accessing Via YMCS
- From any web browser navigate to https://dm.yealink.com
- You will be prompted for a Username and Password. enter your credentials and login.
- After logging in, click Phone Device, then Device List
- Search for your device using the MAC Address, then on to the right of the device, click
Diagnosis - Click on Screen Capture
- An image of the device's screen will be displayed. You can click Screen Capture again to
refresh, or click Download to download an image of the screen