You are viewing an Archived item in your Knowledge Base, it is not publicly accessible.

  • Home
  • Hardware & Software
  • Provisioning

Obihai 200/300: Provisioning

Written by Marissa Orsini

Updated at September 6th, 2024

Contact Us

  • The Essentials
    FAQs Forms
  • Announcements
    Carrier Events mFax Events Platform Events Release Notes
  • Billing Administration
    Datagate OneBill
  • Faxing
    mFax - Analog mFax - Digital Native Fax
  • Hardware & Software
    Manual Configuration Provisioning NDP Axis Cisco Fanvil Grandstream Polycom Snom Yealink Mobile Applications Desktop Applications Mobile-X SNAPbuilder TeamMate Connector UC Integrator
  • Hosted Voice
    Auto Attendants Branding Call Queues Call Routing CDRs Conferencing E-911 Features Fraud Integrations Inventory / Phone Numbers Local & Toll Free Porting Onboarding Recommendations SNAP.HD SIP Trunking SMS / MMS Users Voicemail Caller ID
  • Troubleshooting
    VoIPmonitor Firewalls PBX
  • Ray's Stuff
+ More

Table of Contents

Add a Base Profile Add Device to Obitalk Portal

Scope:

The following steps will allow you to configure an Obihai ATA phone manually for use with your Hosted PBX service. Note that a Faxbridge is the recommended device for analog fax and we will not be able to assist in troubleshooting any issues related to faxing with traditional ATAs.

 

Requirements:

  • If you or your provider has not already done so, Add Your Device to the Manager Portal
  • An Obitalk.com Account
  • Lineman's butt set, or an analog phone
  • All entries are case-sensitive unless otherwise noted
  • Firmware Version Required: 3.1.0 (build 5110)+
 

 

Add a Base Profile

This step only needs to be completed once.

  1. Select Manage Base Profiles from the left menu
  2. Select the next available base profile in the dropdown
  3. Name the profile Hosted PBX
  4. Set Default Profile to yes
  5. In the Profile field, enter the following:
<?xml version="1.0" encoding="UTF-8"?>
<!-- OBi Configuration File-->
<ParameterList>
<Object><Name>X_DeviceManagement.ITSPProvisioning.</Name>
<P><Name>ConfigURL</Name><Value>http://162.217.10.24/cfg/${MAC}.xml</Value></P>
</Object>
</ParameterList>
  1. Click Update

Add Device to Obitalk Portal

  1. Connect your Obi device to the LAN and power
  2. Connect your lineman's butt set or analog telephone to the Phone port
  3. Using any browser navigate to https://obitalk.com and log in
  4. From the left menu click Add Device
  5. Click Next
  6. Open a line on the obihai device and press the key codes listed on the page
  7. You will hear an announcement saying "The number you've dialed has been sent to the server". You may disconnect the line
  8. The screen will change showing the Device model, OBi #, MAC, SN and status
  9. Click Confirm
  10. You should be taken back to your Manage Devices page with the notice that the Obihai has been added to your account
  11. Click on the ObiNo of the device you wish to manage
  12. Under the Device Details tab, update the following fields
    1. Primary Line: SP1 Service
    2. Base Profile: Select the Base Profile previously created
  13. Under the Notes tab, use the Device Note field to add a brief description of the ATA's use
  14. Click Save

 

obihai provisioning

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • V-Tech: Manual Provisioning
  • Device Provisioning via DHCP Options
  • Reset Global One Time Password
  • Snom D series: Provisioning

Knowledge Base Software powered by Helpjuice

Expand