Viking IP1700 Provisioning
Written by Mira Beltre
Updated at December 15th, 2025
Table of Contents
Scope
Intended Audience: All Users
This article goes over provisioning a Viking IP1700
Download and Install the Software
- Navigate to www.vikingelectronics.com
- Enter K-1700-IP in the search field
- Click K-1700-IP search Result
- Scroll down to Downloads and click IP Programming Software
- Install and launch the software
Provisioning Device
- Click the IP Settings Tab
- Set the SIP Server settings
- To view the registration information for a softphone or manually registered phone, edit the newly created device and note the Domain/Proxy, Outbound Proxy, Username, and Password
- Server: FQDN
- Outbound Proxy: configure by IP address to the correct server
- Authentic ID: ext that the device is assigned to
- Username: ext that the device is assigned to
- Password: Gained from device settings in manager portal
- To view the registration information for a softphone or manually registered phone, edit the newly created device and note the Domain/Proxy, Outbound Proxy, Username, and Password
- Once the changes have been made, an Apply button will be visible at the bottom of the screen. Click the Apply button to Provision the line.
- Once the provisioning is complete, on the Alarms/Firmware tab, you can see registration status.
- Once the provisioning is complete, on the Alarms/Firmware tab, you can see registration status.