• Home
  • Hosted Voice
  • SIP Trunking

PBXact SIP Trunk Setup

Written by Marissa Orsini

Updated at March 12th, 2024

Contact Us

  • The Essentials
    FAQs Forms
  • Announcements
    Carrier Events mFax Events Platform Events Release Notes
  • Billing Administration
    Datagate OneBill
  • Faxing
    mFax - Analog mFax - Digital Native Fax
  • Hardware & Software
    Manual Configuration Provisioning NDP Axis Cisco Fanvil Grandstream Polycom Snom Yealink Mobile Applications Desktop Applications Mobile-X SNAPbuilder TeamMate Connector UC Integrator
  • Hosted Voice
    Auto Attendants Branding Call Queues Call Routing CDRs Conferencing E-911 Features Fraud Integrations Inventory / Phone Numbers Local & Toll Free Porting Onboarding Recommendations SNAP.HD SIP Trunking SMS / MMS Users Voicemail Caller ID
  • Troubleshooting
    VoIPmonitor Firewalls PBX
  • Ray's Stuff
+ More

Table of Contents

Configure Chan SIP and Chan PJ SIP Configure SIP Trunk

Scope:

The following steps will allow you to connect our hosted SIP trunk with your PBXact server using IP-based authentication.

 

Requirements:

  • Tested on PBXact 14.0.16.4
  • Administrator privileges to the web console
  • Static IP of server
  • SIP trunk information (see Create a SIP Trunk)
 

 

Configure Chan SIP and Chan PJ SIP

  1. Click on Modules, then Asterisk SIP Settings
  2. Click on Chan SIP Settings
  3. Scroll down to Bind Port and enter 5060
  4. Set TLS Bind Port to 5061
  5. Click Submit
  6. Scroll to top and click Chan PJSIP Settings
  7. Scroll down to Port to Listen On and enter 5161
  8. Click Submit

This will require a restart of Asterisk to take effect


Configure SIP Trunk

  1. Click on Modules, then click Trunks
  2. Click Add Trunk then Add SIP (chan_sip) Trunk
  3. Under General, enter the following
    1. Trunk Name: VoIP Trunk
    2. Outbound CallerID: Enter main number. Can be overridden per extension
    3. CID Options: Allow Any CID
  4. Under sip Settings
    1. Under Outgoing
      1. Trunk Name: voip-out
      2. Peer Details:
        type=peer
        trustrpid=yes
        session-timers=refuse
        rfc2833compensate=yes
        qualify=no
        outboundproxy=sbc.ucaasnetwork.com
        nat=no
        insecure=port,invite
        host=sbc.ucaasnetwork.com
        fromdomain=xxxxx
        dtmfmode=rfc2833
        disallow=all
        context=from-pstn
        canreinvite=no
        allow=ulaw
    2. Under Incoming
      1. Trunk Name: voip-in
      2. Peer Details
        type=user
        outboundproxy=sbc.ucaasnetwork.com
        host=sbc.ucaasnetwork.com
        fromuser=xxxxx
        fromdomain=xxxxx
    3. Click Submit

Configure Inbound Routes

 

 

 

 

sip trunk pbxact

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Yeastar S: Connect a SIP Trunk
  • Bring Your Own Telco (BYOT) Considerations
  • Obihai 200/300: SIP Trunk Configuration

Knowledge Base Software powered by Helpjuice

Expand