Grandstream: Manually Register HT8xx
Written by Marissa Orsini
Updated at December 2nd, 2024
Table of Contents
Scope
Intended Audience: All End User
This article details the process of manually registering any Grandstream HT8xx ATA's FXO and FXS ports.
Requirements
- Access to the Manager Portal
- Access to the HT8xx's web GUI (can be accessed via IP address; steps to locate the IP can be found at the top of this KB article)
- Device added to a user in the Manager Portal (see Add a SIP Phone; do not add specify a model for the device)
Locate the Registration Information
- Locate the user in the client's domain and select Edit > Phones
- Hover over the unregistered device and select Edit
- Note the Domain/Proxy, Outbound Proxy, Username, and Password
Register the Ports
- Using a web browser, navigate to the IP address of the ATA
- Log in. The default credentials are admin / admin
- Navigate to the FXS Port tab and enter in the following info:
- Primary SIP Server: Domain/Proxy
- Prefer Primary SIP Server: Yes
- Outbound Proxy: sbc.ucaasnetwork.com
- Prefer Primary Outbound Proxy: Yes
- SIP User ID: Username
- Authenticate ID: Username
- Authenticate Password: Password
- Name: Username
-
Local SIP Port: 5060
- Navigate to the bottom of the page and select Update. Once the page finishes refreshing, select Apply to apply the changes.
You should see the ATA register in the Manager Portal about 5 minutes after applying the changes. If it doesn't register automatically, try rebooting the ATA using the Reboot button. - Navigate to the FXO Port tab and repeat steps 1-4
